"Fig. similar. , errors in texts and images excepted."

Eltako timing relay TGI12DX-UC NEW

Item condition: New and in original packaging

Manufacturers: Eltako#
EAN: 4010312603116
Heiz24 article number: SP0665209
TARIC: 85364900
Country of origin: CN
Category: Distribution and securing material

€ 46,78

incl. 19% VAT , plus

Choose tax zone / country of delivery

Available for immediate order
Estimated delivery time (may vary): 3 - 5 Workdays (DE - foreign countries differ)

17 Pcs. in the supplier warehouse

Estimated delivery time (may vary): 3 - 5 workdays (DE - foreign countries differ)

more than 17 Pcs. we can order for you

Pcs.

Clock generator starting with pulse, 1 changeover contact potential-free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamps 2000W*. Stand-by loss only 0.02-0.4 Watt. Modular devices for mounting on DIN-EN 60715 TH35 rail. 1 division unit =18mm wide, 58mm deep. It?s possible to set t1 and t2 separately with the same time base via a second multiplier. With the patented Eltako Duplex Technology (DX), the normally potential-free contacts can still switch in zero crossing when switching 230V AC 50Hz, thus drastically reducing wear. To do this, simply connect the N conductor to the terminal (N) and L to 15 (L). This results in an additional stand-by loss of only 0.1 Watt. Universal control voltage 8..230V UC. Supply voltage same as control voltage. Time range 0.1 seconds to 40 hours. Due to the use of a bistable relay, there is no coil loss and no heating through this, even when switched on. After installation, wait for the automatic short synchronisation before connecting the switched consumer to the mains. The LED under the large rotary switch informs about the contact position during the time lapse. It flashes as long as the make contact 15-18 is open (15-16 closed) and lights up continuously as long as the make contact 15-18 is closed (15-16 open). The time base T is set with the latching rotary switch T. The basic values available are 0.1 second, 0.5 seconds, 2 seconds, 5 seconds, 1 minute, 2 minutes, 5 minutes, 1 hour, 2 hours and 4 hours. The total time results from the time base multiplied by the multiplier. The multiplier xT is set with the latching rotary switch xT and lies between 1 and 10. Thus, times between 0.1 second (time base 0.1 second and multiplier1) and 40 hours (time base 4 hours and multiplier 10) can be set. * The maximum load can be used from a delay or cycle time of 5 minutes. For shorter times, the maximum load is reduced as follows: Up to 2 seconds to 15%, up to 2 minutes to 30%, up to 5 minutes to 60%.

Item information	Value
Mounting type:	DIN-Schiene
Width in units of division:	1
Supply voltage type:	AC/DC
Control voltage type 1:	AC/DC
Function:	Taktgeber mit Impuls beginnend
Actuation type:	analog mit Einzelfunktion
Supply voltage:	8..230 V
Installation height:	58 mm
Control voltage frequency 1:	50 Hz
Control voltage 1:	8..230 V
1. Time range:	0,1..40
1. Time range Unit:	Minuten/Stunden
Switching capacity incandescent lamps:	2000 W
Switching capacity fluorescent lamps DUO:	1000 VA
Switching capacity fluorescent lamps parallel:	500 VA
Number of switches:	1
Switching capacity fluorescent lamps inductive:	1000 VA
Shipping weight:	0,08 kg
Item weight:	0,08 kg
Dimensions ( Length × Width × Height ):	2,00 × 9,00 × 7,00 cm

There are no reviews yet.