"Fig. similar. , errors in texts and images excepted."

Eltako staircase lighting timer TLZ12D-plus NEW

Item condition: New and in original packaging

Manufacturers: Eltako#
EAN: 4010312401712
Heiz24 article number: SP5710346
TARIC: 85365080
Country of origin: CN
Category: Distribution and securing material

€ 41,45

incl. 19% VAT , plus

Choose tax zone / country of delivery

Available for immediate order
Estimated delivery time (may vary): 3 - 5 Workdays (DE - foreign countries differ)

22 Pcs. in the supplier warehouse

Estimated delivery time (may vary): 3 - 5 workdays (DE - foreign countries differ)

more than 22 Pcs. we can order for you

Pcs.

1 NO contact not potential-free 16A/250V AC, 230V LED lamps up to 600W, ESL up to 200W, incandescent lamps up to 2300W. Control voltage 230V and/or 8..230V UC. Switch-off prewarning and push-button permanent light can be switched on. Stand-by loss only 0.5W. With ESL optimisation and multifunction. The functions and times are entered with the MODE and SET keys according to the operating instructions and displayed digitally on the LC display. A key lock is possible. Contact switching in zero crossing to protect the contacts and lamps. In particular, this prolongs the life of energy-saving lamps. The noiseless electronics do not bother the most sensitive ear - in contrast to many synchronous motors with mechanical gears. Due to the use of a bistable relay, there is no coil power loss and no heating through this, even when switched on. After installation, wait for the automatic short synchronisation before connecting the switched load to the mains. Control, supply and switching voltage 230V. Additionally with galvanically isolated universal control voltage 8..230V UC. For 3- and 4-wire circuits, can be switched subsequently, with attic lighting for 4-wire circuits. Automatic recognition of the circuit type. Glow lamp current up to 50mA, depending on the ignition voltage of the glow lamps. Exact time setting 1 to 99 minutes. Separate continuous light button with overlapping SET button in TLZ, ESV, ES and ER functions. With motion detector control input BM, which converts the input signal into a control pulse in the TLZ function.

Item information	Value
Mounting type:	DIN-Schiene
Width in units of division:	1
Number of contacts as normally open:	1
Supply voltage type:	AC
Control voltage type 1:	AC
Function:	elektronisch mit Multifunktion
Supply voltage:	250 V
Installation depth:	58 mm
Rated switching current:	16 A
Max. Incandescent lamp load:	2300 W
Max. Fluorescent lamp load:	1000 VA
Max. Fluorescent lamp load (duo circuit):	1000 VA
Max. Fluorescent lamp load (parallel compensated):	500 VA
Control voltage frequency 1:	50 Hz
Max. Switching current (cos phi:	0,6)=4 A
Control voltage 1:	230 V
Switch-off early warning:	flackern
Follow-up:	nachschaltbar + Dauerlicht + Zeitverlängerung
Relapse delay:	1 min
Circuit type:	3- und 4-Leiter-Schaltung
Impulse function selectable:	ja
Push button glow lamp current:	50 mA
Control voltage 2:	8..230 V
Control voltage type 2:	AC/DC
Max. Switching capacity LED:	200 W
Shipping weight:	0,08 kg
Item weight:	0,08 kg
Dimensions ( Length × Width × Height ):	2,00 × 9,00 × 7,00 cm

There are no reviews yet.

Others also bought:

Watts radio thermostat with glass touchscreen BT-D03-RF-GT Vision NEW

€ 85,10 *

Eltako R12-100-8V switching relay 1S 16A 22100010 NEW

€ 17,83 *