"Fig. similar. , errors in texts and images excepted."

Eltako switching relay 16A,1S,250VAC ER12DX-UC NEW

Item condition: New and in original packaging

Manufacturers: Eltako#
EAN: 4010312205402
Heiz24 article number: SP0633587
TARIC: 85364900
Country of origin: CN
Category: Sicherungsautomaten, SHL,FI und sonst. Einbaugeräte

€ 38,20

incl. 19% VAT , plus

Choose tax zone / country of delivery

Available for immediate order
Estimated delivery time (may vary): 3 - 5 Workdays (DE - foreign countries differ)

80 Pcs. in the supplier warehouse

Estimated delivery time (may vary): 3 - 5 workdays (DE - foreign countries differ)

more than 80 Pcs. we can order for you

Pcs.

1 NO contact potential-free 16A/250V AC, 230V LED lamps up to 600W, incandescent lamps 2000W. No stand-by loss. Modular device for mounting on DIN-EN 60715 TH35 rail. 1 division unit =18mm wide, 58mm deep. State-of-the-art hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. With the patented Eltako Duplex technology (DX), the normally potential-free contacts can still switch in zero crossing when switching 230 V AC 50 Hz, thus drastically reducing wear. To do this, simply connect the N conductor to the terminal (N) and L to 1 (L). This results in a stand-by loss of only 0.1 Watt. If the contact is used to control switchgear that does not itself switch in zero-crossing, (N) should not be connected, as the additional closing delay will otherwise have the opposite effect. Universal control voltage 8..230V UC. Very low switching noise. Control indicator with light-emitting diode. The terminal assignment is identical to the electromechanical switching relay R12-100-. Due to the use of a bistable relay, there is no coil power loss and no heating even when switched on. The relay contact can be open or closed at start-up and synchronises itself at the first actuation. This relay is not suitable for feedback with the switching voltage of a dimmer switch. For this purpose, only use the relays ESR12DDX-UC, ESR12NP-230V+UC or ESR61NP-230V+UC. The electronics have no power supply of their own and therefore no standby loss. Only when the control contact is closed is the microcontroller activated, which switches the bistable relay in the correct direction. When the control contact opens or the control voltage drops, the relay switches back.

Item information	Value
Mounting type:	DIN-Schiene
Width in units of division:	1
Number of contacts as normally open:	1
Supply voltage type:	AC
Control voltage type 1:	AC/DC
Function:	teilelektronisch
Supply voltage:	250 V
Installation depth:	58 mm
Rated current:	16 A
Max. Incandescent lamp load:	2000 W
Max. Fluorescent lamp load:	1000 VA
Max. Fluorescent lamp load (duo circuit):	1000 VA
Max. Fluorescent lamp load (parallel compensated):	500 VA
Control voltage frequency 1:	50 Hz
Max. Switching current (cos phi:	0,6)=4 A
Control voltage 1:	8..230 V
Shipping weight:	0,08 kg
Item weight:	0,08 kg
Dimensions ( Length × Width × Height ):	2,00 × 9,00 × 7,00 cm

There are no reviews yet.