Choose your country of delivery to see prices and products for your location.
Choose tax zone / country of delivery
Radio 4-channel push-button 55x55mm for Busch Reflex and Duro frames. Generates the energy for radio telegrams even when the button is pressed, therefore no connection cable and no stand-by loss. With rocker and double rocker. The scope of delivery includes a rocker, a double rocker, a mounting frame, a retaining plate (all the same colour), the radio module and an adhesive foil. Wireless pushbuttons with one rocker can send two evaluable signals: Press rocker up and press rocker down. Wireless pushbuttons with a double rocker can send four evaluable signals: Press two rockers each up and down. The mounting plate can be screwed onto a flat surface or glued to the wall, glass or furniture with the enclosed adhesive foil. Above a 55mm switch box, the sleeves provided in the box are used for screw fastening. The double rocker is snapped onto the radio module ex works. If this is to be replaced with the large rocker, pull the rocker halves off towards the front and do not bend them towards the middle. Then snap the large rocker onto the radio module so that its 0 and I markings on the back match. When gluing on, first glue on the set of holding plate with frame and fastening frame - with the catches at the top and bottom. Then snap in the set of radio module with rocker - marking 0 on the back always at the top. Before screwing on, detach the frame with the fixing frame from the retaining plate. To do this, press the catches of the retaining plate outwards. Then screw on the retaining plate with the catches at the top and bottom, snap on the frame with the fastening frame and snap in the radio module set with rocker - marking 0 on the back always at the top. For screw fastening, we recommend countersunk sheet metal screws 2.9x25mm, DIN 7982 C. Both with 5x25mm dowels and on 55mm switch boxes. The radio module contained in the radio pushbutton can be taught-in in encrypted form in all encodable actuators of the 61 and 71 series, as well as in the FAM14, according to the operating instructions. The wireless pushbutton encryption rocker FTVW is required for this. Encryptable actuators bear the key pictogram.
There are no reviews yet.