Choose your country of delivery to see prices and products for your location.
Choose tax zone / country of delivery
LED dimmer switch 12-36V DC. Power MOSFET for LED lamps 12-36V DC up to 4A, pulse width modulation PWM. Stand-by loss only 0.1 Watt. Minimum brightness and dimming speed adjustable. With nursery and snooze circuit. For recessed mounting. 45mm long, 45mm wide, 18mm deep. Dimmer switch for R and LED loads up to 4A depending on ventilation conditions. With soft on and soft off for lamp protection. Supply voltage 12 to 36V DC, depending on the connected LED lighting. A pulse-proof power supply unit is required. Universal control voltage 8..230V UC, electrically isolated from the supply voltage. Either directional push-buttons can be connected to arrow up+down, or these terminals are bridged and a push-button is connected as a universal push-button. With universal push-button: Short control commands switch on/off, permanent control changes the brightness up to the maximum value. Interrupting the control changes the dimming direction. With direction switch: Switch on and dim up with arrow up, switch off and dim down with arrow down. A double pulse with the arrow pointing upwards causes dimming up to full brightness with the set dimming speed. The set brightness level remains stored when the unit is switched off (memory). In the event of a power failure, the switching position and the brightness level are stored and will be switched on when the supply voltage returns, if necessary. Automatic electronic overload protection and overtemperature cut-off. The LED indicates activation by flashing briefly. The minimum brightness (fully dimmed) can be set with the upper %lamp rotary switch. With the lower dim speed rotary switch, the dimming speed can be set. At the same time, the duration of soft on and soft off is changed. With child's room switch (universal push-button or directional push-button): When switching on with a longer push-button action, the light is switched on after approx. 1 second with the lowest brightness and, as long as the push-button is pressed further, it is slowly dimmed up without changing the last stored brightness level. With snooze circuit (universal push-button or directional push-button): A double pulse dims the lighting from the current dimmer setting to the minimum brightness and switches it off. The max. dimming time of 60 minutes depends on the current dimming position and the set minimum brightness and can thus be shortened accordingly. You can switch off at any time during the dimming process by briefly pressing the button. A long button press during the dimming down process dims up and terminates the snooze function.
There are no reviews yet.