Choose your country of delivery to see prices and products for your location.
Choose tax zone / country of delivery
Suspended support, 3-sided perforated U-profile with welded-on top plate, system HU 4530/..., for cantilevers for one-/two- and three-sided installation, to prevent deformation of the suspended support profile when installing cantilevers, for static reasons the suspended support spacer profile HDS 45.30 F with hexagon head screw must be taken into account for static reasons. If the bracket is attached to the suspended support profile on one side, it is preferable to attach the closed side of the bracket in alignment with the profile web of the suspended support. For static reasons and to enable the protective cap to be fitted without problems, the bracket must be mounted at a distance of x=50 mm (lower edge of bracket to end of hanger bracket), above the end of the hanger bracket. for brackets: KTAL... KTAM... = 400 mm KTA... = 400 mm Dimensions (approx. Dimensions) Head plate L x W x d: 130 x 40 x 5 mm Mounting holes: 11 x 20 mm Centre distance: 100 mm Head plate holes centre: 11 x 20 mm 15 mm from side edge U-profile: 43.5 x 29.5 x 29.5 mm Material thickness t: 2 mm Distance between three-sided profile perforation and head plate: 123 mm Three-sided profile perforation, single row: 11 x 30 mm Centre distance: 50 mm Total length L: 401 mm Material: Steel, hot-dip galvanised according to DIN EN ISO 1461
There are no reviews yet.