Choose your country of delivery to see prices and products for your location.
Choose tax zone / country of delivery
with extension input for attachments art. no.: ... 1700 .., .. 1701 .., .. 1750 D .., .. 1751 BT ..., ... 17180 .., .. 17280 .., .. 17181 .., .. 17281 ..., DWPM 17360 ... Intended use Switching and dimming of lighting Operation with suitable attachment from LB-Management Installation in device box according to EN 60670-1 Product characteristics Device operates according to the phase-angle or phase-angle principle automatic or manual setting of the dimming principle suitable for the load Display of the set operating mode by means of LED Unit can be operated without neutral conductor Switch-on by means of lamp-protecting soft start Switch-on with last set brightness or stored switch-on brightness Switch-on brightness can be permanently stored Minimum brightness can be permanently stored Connection of extension units possible Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest Electronic overtemperature protection Test mode for function testing Hotelcard function Power extension by means of power add-ons (art. no.-No. ULZ 1755 REG) Optional accessories: LED compensation module, art. no.: KM LED 230 U Rated voltage: AC 230 V ~ Mains frequency: 50/60 Hz Standby power depending on attachment: approx. 0.1 ... 0.5 W Power loss: approx. 4 W Ambient temperature: -5 ... +45 °C Connected load at 25 °C Incandescent lamps: 20 ... 420 W HV halogen lamps: 20 ... 420 W Electronic transformers: 20 ... 420 W Electronic transformers with NV-LED: typ. 20 ... 100 W Inductive transformers: 20 ... 420 VA Inductive transformers with LV-LED: typ. 20 ... 100 VA HV LED lamps dimmable: typ. 3 ... 100 W Compact fluorescent lamps dimmable: typ. 3 ... 100 W LED phase-sectioning operating mode: connected load for HV LED lamps typ. 3 ... 400 W, electronic transformers with LV LED typ. 20 ... 200 W. Ohmic-capacitive: 20 ... 420 W Capacitive-inductive: not permitted Ohmic-inductive: 20 ... 420 VA Ohmic and HV-LED: typ. 3 ... 100 W Ohmsch and compact fluorescent: typ. 3 ... 100 W Power additives: see instructions for power additive Connection: Screw terminals solid: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 2.5 mm2 finely stranded without ferrule: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 2.5 mm2 finely stranded with wire end ferrule: 1 x 0.5 ... 4.0 mm22 x 0.5 ... 1.5 mm2 Number of extensions extension 2-wire art. no. 1720 NE: unlimited extension 3-wire art. no. 1723 NE: 10 rotary extension 3-wire art. no.: 1733 DNE: 10 push-button: unlimited Total length extension line: max. 100 m Total length load line: max. 100 m
There are no reviews yet.