Choose your country of delivery to see prices and products for your location.
Choose tax zone / country of delivery
Installation recommendation for all BE-EMV ball valves...- The EMC valve must be installed in accordance with the relevant technical regulations- Sealant or hemp residues or similar must not get into the valve body- To avoid blocking the valve ball, observe the following instructions and avoid any soldering or welding work in the direct vicinity of the valve- Important note! In order to achieve optimum operational safety, we recommend flushing the system beforehand and installing an appropriate dirt trap (0.65µm) beforeeach EMC valve (see installation diagram). Installation may only be carried out by a specialist! The relevant VDE + TÜV regulations must be observed.- Use in energy distribution and plant engineering, heating, sanitary and solar systems, in compressed air and irrigation distributors for low-viscosity, non-aggressive fluids, medium max. 105°C- Max. Operating pressure: 10 bar, with electric motorisation- Versions in 24V~AC on request- Ambient temp. -10° to +50°C non-condensing- With integrated relay for 2-point control- Full cross-section flow version- Drive protection type: IP 44 non-condensing- Incl. connection cable- Not to be used for service/drinking water
There are no reviews yet.