Choose your country of delivery to see prices and products for your location.
Choose tax zone / country of delivery
Radio blind and shutter actuator 1+1 NO contact 4A/250V AC, not potential-free, for one shading element motor 230V AC. Stand-by loss only 0.6 Watt. For recessed mounting. 49x51mm, 20mm deep. The terminals are plug-in terminals for conductor cross-sections from 0.2mm² to 2.5mm². Up to 32 radio universal push-buttons, radio directional push-buttons and radio central control push-buttons can be taught-in with the convenient jogging technology. Contact switching in zero crossing. Bidirectional radio can be activated. Supply, switching and control voltage locally 230V. In the event of a supply voltage failure, the system is switched off in a defined manner. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally with a conventional control pushbutton mounted in front of it. Either separate local control inputs for up and down as direction push-buttons, or these two inputs are bridged and controlled with a single push-button as a universal push-button. In this case, the direction is changed by interrupting the control. A glow lamp current is not permitted. Both a radio pushbutton with the function Up, Stop, Down, Stop can be taught-in as a universal pushbutton like the local pushbutton and a radio pushbutton like a double shutter pushbutton can be taught-in as a direction pushbutton with press up Up and press down Down. A short tap interrupts the movement immediately. Central control push-buttons with static priority can also be taught-in. The static priority is only active as long as the radio pushbutton is pressed. With a control signal, e.g. of a radio transmitter module FSM61 with switches taught-in as a central control push-button, the switching position Up or Down and the priority are activated specifically. With priority because these control signals cannot be overridden by other control signals until the central command is cancelled again by the end of the control signal. A jog turn function can be activated: The universal push-button, direction push-button and the local push-button initially have a static effect and thus allow the blinds to be turned. Only after control >1 second is it switched over to dynamic. When controlled via the GFVS software, movement commands for up and down can be started with the exact movement time. Since the actuator reports back the exact time travelled after each activity, even when movement is triggered by a push-button, the position of the sunshade is always correctly displayed in the GFVS software. When the up and down end positions are reached, the position is automatically synchronised. If a radio window contact is taught-in, a lock-out protection is set up when the window or door is open, which prevents central down, time switch down and GFVS down commands.
There are no reviews yet.