Danfoss Icon(tm) programmable version,
flush-mounted
Suitable for and optimised for use with hydronic underfloor heating and radiators.
Suitable for standard flush-mounted boxes with a centre-to-centre distance of 60 mm,
compatible with switch ranges from manufacturers Busch-Jaeger, Berker, Jung, GIRA, Merten, Legrand, Peha and Hager.
For further information, see www.heating.danfoss.de
Can be used in the 230 V version as a stand-alone controller or in conjunction with the Danfoss FH-WC main controller (item number 088H0016)
The thermostat features a glass-like control panel with a backlit LED display.
In normal operation, the display is switched off.
The thermostat can silently control up to five thermal actuators (Danfoss TWA, Thermot) via a 230 V triac output.
Precise control via adjustable PWM (Pulse Width Modulation)
Seven predefined schedules, temporary temperature adjustment via the three mode buttons or 24-hour programme.
Automatic summer/winter time changeover
Adaptive self-learning function for heating
and cooling-down times
The cooling function and the away function can be activated via two 230V inputs.
The heating/cooling function and the away function cannot be connected via the FH-WC.
Smooth, easy-to-clean surface, very high UV resistance
Anti-seizing function for the valve spindle,
Temperature range 5–35 °C,
Frost protection function,
Actual temperature display,
Limitable,
IP21,
Option to connect a floor sensor (item number 088U1110).
Power supply: 220–240 V, 50/60 Hz
AC
Contact rating / output: Max.
Continuous load: 50 mA or 10 W.
Max. switching capacity (inrush current): 3 A <= 100 ms
Manufacturer: Danfoss
Type: Icon(tm) programmable version, flush-mounted
Order no.: 088U1020
Danfoss Icon Programmable
Room thermostat, 230 V
Danfoss Icon comprises various room thermostats for hot water underfloor heating systems, each designed for
or surface-mounted installation.
Danfoss Icon Programmable is a 230 V version and can be used as a stand-alone controller or in conjunction with terminal block 088U1040.
Via a triac output, the thermostat can control up to five thermal actuators.
The user can choose between seven predefined heating schedules. Temporary override is achieved using the three mode buttons.
The thermostat operates with a constant room temperature as the setpoint even without an active heating schedule.
The thermostat uses forecasts (adaptive learning).
The thermostat features a control panel made of glass-like material with a backlit LED display. In normal operation, the display shows ‘OFF’.
Features:
Precise PWM control (pulse width modulation)
Compatible with standard control systems from many manufacturers
Seven predefined schedules and forecasting function
Limitation of minimum
and maximum temperatures via the user menu
Modern design and simple user interface
Frost protection function
Compatible with NC
or NO actuators (230 V)
Can be optimised for various heat sources via the service menu (radiators
or underfloor heating)
Anti-blocking function for the valves
Suitable for systems with cooling
Input for central override
Compatible with floor sensors (optional)
Very high UV resistance
No special installation techniques or tools required.