• MM100 heating circuit module for the heating/cooling/hot water functions for use in the Logamatic EMS plus control system. The function of the module can be set via the address coding switch and via the RC310, HMC310, BC400 or RC200 operating units. Range of functions with MM100 address switch position 14:
• Control of a heating/cooling circuit with pump (PC1), mixer (VC1, optional), flow temperature sensor (TC1, optional), temperature monitor (MC1, floor heating), dew point monitor (heat pump with cooling function, MD1) and a switch sensor (T0, optional). Adjustable time programme (RC310, BC400:
• 2 programmes, RC200:
• 1 programme). With RC310/BC400/RC200:
• Control mode can be set ("weathercompensated"/"roomcompensated"). Alternatively with BC400 "individually roomcontrolled". Alternatively for gas/l heat generators, control type "constant" with heat request via switching contact. Frost protection, night setback, summer/winter changeover adjustable. Alternative:
• Range of functions with MM100 address switch position 9 or 10 (only with gas/l):
• Control of a storage tank charging circuit with storage tank charging pump (PC1), circulation pump (VC1) and a diverter valve sensor (T0, optional) as well as a separate time programme for hot water and circulation. Required for the solar function "Monitoring daily heating 60 C" or if the storage tank charging pump may only be started when the boiler temperature > storage tank temperature if a reduced temperature level is required in addition to the normal hot water temperature level or Alternatively:
• scope of functions with MM100 address switch position 10 (only with gas/l):
• Control of a second cylinder charging circuit (in addition to cylinder 1) with separate cylinder charging pump (PC1), cylinder temperature sensor (TC1) and circulation pump (VC1) as well as separate time programme for hot water and circulation. Further features:
• TB1 temperature monitor for underfloor heating can be connected, pump operation selection via switched 230 V signal or alternatively 230 V continuous signal and additional potentialfree start/stop contact in the module Pump malfunction alarm input (potentialfree) Suitable for highefficiency pump connection Simple automatic detection of the connected components with configuration suggestion and operation via BC400/RC310/RC200 Internal communication via EMS data bus Special planning information:
• In conjunction with system control unit BC400/RC310 max. 6 modules per system (4 x heating circuit with mixer + 2 x hot water) In conjunction with control unit RC200 max. 1 module per system (1 heating circuit with mixer) In conjunction with heat pump max. 4 modules per system (4 x heating circuit) Cannot be combined with MM10/ SM10/WM10 modules Mounting Module, if possible in the device, for internal mounting, alternatively for wall mounting or on a tophat rail Coded and colourcoded connection plugs Communication via EMS data bus MM100 heating circuit module for the heating/cooling/hot water functions for use in the Logamatic EMS plus control system. The function of the module can be set via the address coding switch and via the RC310, HMC310, BC400 or RC200 operating units. Range of functions with MM100 address switch position 14:
• Control of a heating/cooling circuit with pump (PC1), mixer (VC1, optional), flow temperature sensor (TC1, optional), temperature monitor (MC1, floor heating), dew point monitor (heat pump with cooling function, MD1) and a switch sensor (T0, optional). Adjustable time programme (RC310, BC400:
• 2 programmes, RC200:
• 1 programme). With RC310/BC400/RC200:
• Control mode can be set ("weathercompensated"/"roomcompensated"). Alternatively with BC400 "individually roomcontrolled". Alternatively for gas/l heat generators, control type "constant" with heat request via switching contact. Frost protection, night setback, summer/winter changeover adjustable. Alternative:
• Range of functions with MM100 address switch position 9 or 10 (only with gas/l):
• Control of a storage tank charging circuit with storage tank charging pump (PC1), circulation pump (VC1) and a diverter valve sensor (T0, optional) as well as a separate time programme for hot water and circulation. Required for the solar function "Monitoring daily heating 60 C" or if the storage tank charging pump may only be started when the boiler temperature > storage tank temperature if a reduced temperature level is required in addition to the normal hot water temperature level or Alternatively:
• scope of functions with MM100 address switch position 10 (only with gas/l):
• Control of a second cylinder charging circuit (in addition to cylinder 1) with separate cylinder charging pump (PC1), cylinder temperature sensor (TC1) and circulation pump (VC1) as well as separate time programme for hot water and circulation. Further features:
• TB1 temperature monitor for underfloor heating can be connected, pump operation selection via switched 230 V signal or alternatively 230 V continuous signal and additional potentialfree start/stop contact in the module Pump malfunction alarm input (potentialfree) Suitable for highefficiency pump connection Simple automatic detection of the connected components with configuration suggestion and operation via BC400/RC310/RC200 Internal communication via EMS data bus Special planning information:
• In conjunction with system control unit BC400/RC310 max. 6 modules per system (4 x heating circuit with mixer + 2 x hot water) In conjunction with control unit RC200 max. 1 module per system (1 heating circuit with mixer) In conjunction with heat pump max. 4 modules per system (4 x heating circuit) Cannot be combined with MM10/ SM10/WM10 modules Mounting Module, if possible in the device, for internal mounting, alternatively for wall mounting or on tophat rail Coded and colourcoded connection plugs Communication via EMS data bus Scope of delivery:
• 1 MM100 module with terminal cover and wall socket, connection plug, cable clamps for connection cable and installation material 1 flow temperature sensor 9 mm Installation instructions Optional accessories:
• Storage tank sensor set including hot water temperature sensor 6 or 9 mm Point sensor 6 or 9 mm Contact thermostat TB1 for protecting an underfloor heating system Buderus article number:
• 7738113391 Scope of delivery:
• 1 MM100 module with terminal cover and wall socket, connection plug, cable clamps for connection cable and installation material 1 flow temperature sensor 9 mm Installation instructions Optional accessories:
• Storage tank sensor set including hot water temperature sensor 6 or 9 mm Diverter switch sensor 6 or 9 mm Contact thermostat TB1 for protecting an underfloor heating system Buderus article number:
• 7738113391
